ELEM-014 THREE-PHASE ELECTRICITY METERING UNIT FOR OUTDOOR INSTALLATION
ELEM-014 is a smart direct-connected commercial electricity meter suitable for low voltage applications.
The meter provides extensive functionality in key areas of metering: power quality, anti-tampering, security, billing data protection and outage support.
This version is intended for installation on power lines supports.
Portable remote display unit is available.
The meter provides extensive functionality in key areas of metering: power quality, anti-tampering, security, billing data protection and outage support.
This version is intended for installation on power lines supports.
Portable remote display unit is available.
ELEM-014 THREE-PHASE ELECTRICITY METERING UNIT FOR OUTDOOR INSTALLATION
PURPOSE
– multi-tariff metering of active and reactive energy for forward and reverse directions in three-phase AC circuits;– operating autonomously or as part of the AMI.
Measured parameters
– active and reactive electrical energy of forward and reverse directions;
– active, reactive and apparent power for each phase and total for three phases;
– RMS (effective) current and voltage values for each phase;
– RMS (effective) values of linear voltages;
– power factor for each phase and total;
– instrumentation values (U, I, f, ...).
INTERFACES AND COMMUNICATION
– optical port;– PLC (optional);
– ZigBee 2,4 GHz (optional);
– GSM (optional);
– self-organizing mesh network for PLC and ZigBee interfaces;
– 866 MHz RF for communication with a remote display unit;
– portable remote display unit available.
ANTI-TAMPER CAPABILITIES
– configurable disconnection capability (by remote command or by exceeding internal setting);– disconnection when the voltage is exceeded, or if there is an external magnetic field, or if the temperature inside is critically high;
– visual magnetic field impact indicator;
– main/terminal cover removal detection;
– non-dismountable unit housing;
– anti-tamper built-in 3D magnetic field sensor;
– transparent terminal cover; – self-diagnostics.
Description
PURPOSE
– multi-tariff metering of active and reactive energy for forward and reverse directions in three-phase AC circuits;– operating autonomously or as part of the AMI.
Measured parameters
– active and reactive electrical energy of forward and reverse directions;
– active, reactive and apparent power for each phase and total for three phases;
– RMS (effective) current and voltage values for each phase;
– RMS (effective) values of linear voltages;
– power factor for each phase and total;
– instrumentation values (U, I, f, ...).
INTERFACES AND COMMUNICATION
– optical port;– PLC (optional);
– ZigBee 2,4 GHz (optional);
– GSM (optional);
– self-organizing mesh network for PLC and ZigBee interfaces;
– 866 MHz RF for communication with a remote display unit;
– portable remote display unit available.
ANTI-TAMPER CAPABILITIES
– configurable disconnection capability (by remote command or by exceeding internal setting);– disconnection when the voltage is exceeded, or if there is an external magnetic field, or if the temperature inside is critically high;
– visual magnetic field impact indicator;
– main/terminal cover removal detection;
– non-dismountable unit housing;
– anti-tamper built-in 3D magnetic field sensor;
– transparent terminal cover; – self-diagnostics.